Installation Guide

ManualsBrandsMetra ManualsCar ElectronicsRear Camera Replacement Kit For Jeep Gladiator JT 2020-Up

1

2

3

4

5

6

7

REV. 06/18/2021 INSTJP-JTKT

3

1. Unplug the pink camera cable and set

aside. For this install the pink cable will

not be used so iBEAM suggests ziptieing

the cable back so there is no rattle in the

tailgate.

2. Remove the retention clip around the

camera. Slide in the direction of the

arrow and set aside, this will be need-

ed this later when installing the new

camera.

3. There is a clip below the area highlighted

in Figure B. Press that clip in and slide

the camera out towards the front side of

the tailgate.

Figure A

Figure B

CAMERA REMOVAL (CONT.)