Installation Guide

386-257-1187
|
Metraonline.com
4
Figure A
Figure B
Figure A
CAMERA REMOVAL (CONT.)
1. This iBEAM kit covers the two options
equipped on the Jeep Gladiator.
• Figure A reverse or backup camera,
The bracket with the number 1 is for the
backup camera version.
• Figure B surround view or 360, The
bracket with the number 2 is for the
surround view version.
NOTE: This kit does not RETAIN the 360 system.
It replaces the backup camera of the system.
The 360 or surround view system will be lost.
2. Both types of cameras are removed the
same way. Remove the three torx T6H
screws from the back of the camera
housing.
3. Remove the bracket and camera. Retain
if the the system will need to go back to
factory.