Installation Guide

IMPORTANT

1. Our product is a unique design for your vehicle.

2. Please read the installation instructions carefully before you start.

3. If the vehicle is clean and free of other debris, it will be easy to install.

4. For your safety and to ensure a satisfactory installation, please complete all the installation

steps in the order shown below

PRODUCT INFORMATION:

BEFORE YOU BEGIN

1. Read these instructions and check to be sure all

parts and tools are accounted for.

2. Please retain these installation instructions for

future reference and parts ordering information

2 3

MPS-RZRDP1

INSTALLATION INSTRUCTIONS

#MetraPowerSports

Step 1：Align the pods in the kick panel position on the General. Pods are formed to sit flush with

kick panel. Mark the hole position of each hole, drill a 9/32nd hole.

Step 2：Hold pod and align the holes, insert fender clips.

Step 3：Refer to step 2 to install the other side audio stand.

Left

Right

MPS-GENDP1

INSTALLATION INSTRUCTIONS

#MetraPowerSports

11/20