TE-3BMC User Manual iBeamUSA.com MetraDealer.com techsupport@metra-autosound.
1. Brake light camera 2. Accessories 3 2 1 4 1. 2. 3. 4. 5.
. Connections 1. Remove factory 3rd brake light. 2. Connect red wire off new brake light to +12v and black to ground at factory 3rd brake light connector. This connection will power the brake light when the brake is pressed. 3. Run extension cable though vehicle, up to monitor. Make sure to run cable in the correct orientation (female end to monitor and male end to camera). Avoid placing video cable where it can get pinched or damaged. Connect to monitor's reverse AV input. 4.
. Specifications 3
Notes: _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _________________________
Notes: _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _________________________
Notes: _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _______________________________________________________________________________ _________________________
IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling.