Manual

ManualsBrandsMetra ManualsMobile Rear-View CamerasMetra Rear Parking Assist Kit

TE-4PSK

Product Manual

TE-4PSK

Product Manual

III. Learning Function

If the vehicle has a spare tire or hitch on the back, the

ordinary parking assist system may detect the tire or hitch

which would result in a continuous false alarm. The learning

function on this device can easily remove false alarms and

it will remember the tire or hitch as part of the vehicle,

correcting the alarm. Learning Function Activation: Make

sure there are no objects within 8 feet from the rear of the

vehicle. When the ACC is switched to the ON position, shift

the vehicle from PARK to REVERSE and back continuously

5 times within 10 seconds, after doing this the LED light

on the display will ﬂash three times. The ﬂashing LED will

conﬁrm that the learning function is activated and the

system will remember the tire/hitch/bike holder’s, location

automatically. NOTE: When the hitch or tire has been

removed, you will have to relearn the parking assist system

so it knows that obstruction has been removed.

Installation

III. Learning Function

If the vehicle has a spare tire or hitch on the back, the

ordinary parking assist system may detect the tire or hitch

which would result in a continuous false alarm. The learning

function on this device can easily remove false alarms and

it will remember the tire or hitch as part of the vehicle,

correcting the alarm. Learning Function Activation: Make

sure there are no objects within 8 feet from the rear of the

vehicle. When the ACC is switched to the ON position, shift

the vehicle from PARK to REVERSE and back continuously

5 times within 10 seconds, after doing this the LED light

on the display will ﬂash three times. The ﬂashing LED will

conﬁrm that the learning function is activated and the

system will remember the tire/hitch/bike holder’s, location

automatically. NOTE: When the hitch or tire has been

removed, you will have to relearn the parking assist system

so it knows that obstruction has been removed.

Installation

The iBEAM TE-4PSK parking sensor kit consists of 4

ultrasonic sensors, a control box and an LED display.

The system detects the distance between the vehicle

and any obstructions with the use of the ultrasonic

sensors mounted in the bumper. The distance of

the obstruction will be displayed in feet on the LED

display and an audible warning will be heard. The TE-

4PSK can be upgraded to an 8 sensor parking assist

kit with the help of the TE-RES rubber replacement

parking sensors (purchased separately), 4 sensors

for the front and 4 sensors for the rear.