Owner's Manual

1.) Remo
ve the panel from inside the back door of
the vehicle, there are 4 push pins holding the
panel on the door, remove the 4 pins and
remove the panel.
2.) Pus
h out the light over the license plate. It is
being held in by two side clips.
3.) Unp
lug the light.
4.) Remo
ve the gasket from the light fixture to gain
access to the light fixture. Sometimes you can
pop the light fixture out without removing the
gasket.
5.) Pop
the light fixture out from the hood and light
diffuser. Pay attention when removing the light
fixture to the clips and their orientation to the
hood.