TE-MIFM Product Manual
1. Find a suitable location to surface mount install the camera. Make sure the camera’s view is unobstructed and be careful not to drill into any wires that might damage the vehicle. When all connections have been made and before mounting the camera, verify the camera is working and has good view of the area. Then mount the camera down with the supplied two screws. 2.
Sensor CMOS Effective Pixel 480 X 720 Video Signal NTSC Resolution 500 TV Line S/N Ratio 46dB Current Consumption 35-55 mA Power Supply DC 6V-12V Operating Temperature -30ºC - 75ºC Storage Temperature -40ºC - 85ºC View Angle 175º Diagonal Water Resistance IP68 Minimum Illumination 0.
IMPORTANT If you are having difficulties with the installation of this product, please call out Tech Support line at 1-800-253-TECH. Before doing so, looks over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling.
