Installation Guide

ManualsBrandsMetra ManualsCar ElectronicsUniversal Micro Camera Angled Camera

iBEAMUSA.comiBEAM Vehicle Safety Sytems

REV. 08/04/2021 INSTTE-MIPI

Attention!

When testing the aftermarket

equipment, ensure that all factory equip-

ment is connected before cycling the key to

ignition.

TE-MIPI

INSTALLATION INSTRUCTIONS

#IBEAMSAFETY

Wiring ..................................................................... 2

Specifications .........................................................3

TABLE OF CONTENTS

TOOLS REQUIRED

• Wire stripper

• Tape

• Digital Multi-meter

• Cutter

Universal 800 TV Line

Micro Camera

Visit iBEAMUSA.com for more detailed informatuon about the product.

Product Features

• 55° fixed angled camera

• Resolution: 800 TV Lines

• Water resistant - IP69

• Mirror image - switchable

• Selectable parking lines or independantly triggered

• Viewing angle: 188° Diagonal, 155° Horizontal, 133° Vertical

Part Components

A) Camera B) Hardware and harness

A B

Summary of content (4 pages)

PAGE 1
TE-MIPI INSTALLATION INSTRUCTIONS #IBEAMSAFETY Universal 800 TV Line Micro Camera Visit iBEAMUSA.com for more detailed informatuon about the product. TABLE OF CONTENTS Wiring......................................................................2 Specifications..........................................................
PAGE 2
WIRING/INSTALL Camera Wiring/Install (Figure A) 1. Find a desirable location to mount the camera. Make sure this location is away from moving objects and has a clear visual of the desired view wanted from the camera. 20 ft 24 in 2. Drill a 22mm size hole for the camera and wiring to be ran into the vehicle. 3. Connect the wires to the designated sources below.
PAGE 3
SPECIFICATIONS Image Sensor Signal Resolution Viewing Angle Mininum Illumination Current Consumption Power Range S/N ratio Operating Temp. Storage Temp. Water Resistance Mirror/Normal Image Parking Line Horizontal/Vertical mount Diameter 1/4 color cmos NTSC 800 TV Lines 188° Diagonally, 155° Horizontal, 113° Vertical 0.01 Lux/F1.2 25-55 mA 6V-26V DC 46 dB -40° C ~ 75° C - 60° C ~ 105° C IP69 Selectable Selectable Selectable 26.2mm (W) * 27.7 mm (D) * 16.2mm (H) REV.
PAGE 4
TE-MIPI INSTALLATION INSTRUCTIONS #IBEAMSAFETY Having difficulties? We’re here to help. Contact our Tech Support line at: 386-257-1187 Or via email at: techsupport@metra-autosound.com Tech Support Hours (Eastern Standard Time) Monday - Friday: 9:00 AM - 7:00 PM Saturday: 10:00 AM - 7:00 PM Sunday: 10:00 AM - 4:00 PM ® KNOWLEDGE IS POWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.