Instruction Guide

I. Start!by!lowering!the!tailgate!and!
remove!the!(8)!T30!torx!head!
screws!from!the!tailgate!access!
panel.!
II. Once!inner!tailgate!access!panel!is!
removed!you!will!see!rods!
connected!to!the!tailgate!handle,!
disconnect!those!rods!from!the!
tailgate!handle!by!releasing!them!
from!the!plastic!retainers.!
III. Now!remove!the!(2)!8mm!bolts!
securing!the!tailgate!handle!to!the!
tailgate!and!carefully!remove!the!
tailgate!handle.!
IV. You!will!need!to!swap!the!locking!
mechanism!out!of!the!old!handle!
into!the!new!one.!
V. Route!the!backup!camera’s!wires!
through!the!tailgate!handle’s!
opening!and!through!the!tailgate!
itself.!