Datasheet

Measuring and Regulation Equipment Manufacturer
METREL d.d.
Ljubljanska 77
SI-1354 Horjul
Tel: + 386 (0)1 75 58 200
Fax: + 386 (0)1 75 49 226
E-mail: [e-mail]
http://www.metrel.si
Note! Photographs in this catalogue may slightly differ
from the instruments at the time of delivery.
Subject to technical change without notice.
Technical Specification
MD1060-LED MD1160-LCD
AC Voltage
Test Range 12 V ÷ 690 V 0 V ÷ 690 V
Response Time <1s <1s
Frequency Range 16 ÷ 400 Hz 16 ÷ 400 Hz
DC Voltage
Test Range 12 V ÷ 690 V 0 V ÷ 690 V
Response Time <1s <1s
Continuity
Indication Acoustical and LED indication Acoustical and LED indication
Continuity test (Acoustic) 0 ÷ 500 kΩ +50% 0 ÷ 500 kΩ +50%
Test Current 3.5 µA 3.5 µA
Phase Testing
Phase Testing Single-Pole Phase testing Single-Pole Phase testing
Phase Sequence
Two-Pole Phase
Sequence testing
Two-Pole Phase
Sequence testing
Phase indication >100 V AC >100 V AC
Display
LED bargraph LC display
Tolerance
12 V, 24 V, 50 V, 120 V, 230 V,
400 V, 690 V
0 V ÷ 690 V ± (3% ± 5dgt)
Safety & Protection
Overload Category CAT IV 600 V CAT IV 600 V
Compliant to standards
IEC/EN 61243-3:2010,
DIN VDE 0411,
GS38
IEC/EN 61243-3:2010,
DIN VDE 00411,
IEC 61010-1,
GS38
Protection degree
IP64
For outdoor use:
Water jet and dust tight
protection
IP64
For outdoor use:
Water jet and dust tight
protection
Temperature range
-15 ÷ 55 °C -15 ÷ 55 °C
Power supply
2 x 1,5 V Type AAA Micro 2 x 1,5 V Type AAA Micro
Dimensions
Weight 200 g 200 g
Dimensions 240 x 60 x 20 mm 240 x 60 x 20 mm
Ordering information
Standard set MD 1060-LED
• Instrument MD 1060-LED
• Plastic probe guard in accordance with GS 38, 2 pcs
• 1.5 V battery, type AAA, 2 pcs
• Instruction manual
Ordering information
Standard set MD 1160-LCD
• Instrument MD 1160-LCD
• Plastic probe guard in accordance with GS 38, 2 pcs
• 1.5 V battery, type AAA, 2 pcs
• Instruction manual
Recommended accessories
• Calibration certificate