Operation Manual

OmegaGTPlus / BetaGTPlus Main menu and test modes
35
How to view autotest results from RFID tag
From the TAG menu select View results and press ENTER key to confirm. Refer to
chapter 6.2.1 Results view.
How to send an autotest sequence to RFID tag
From the Autotest custom menu press the F5 (SEND) key. Selected autotest sequence
is loaded to the RFID tag using RFID reader/writer..
See RFID reader/writer user manual for more information.
How to send an autotest sequence/results to RFID tag
Autotest sequence/results can be sent to RFID TAG from the Save results or Recall
memory menu. Press the F3 (SEND) key. When sending data from Recall results menu
select TAG reader/writer option first and press ENTER key to confirm. Selected data
from the instrument are loaded to the RFID tag using RFID reader/writer.
See RFID reader/writer user manual for more information.
3.4.2 Working with barcode reader
Barcode technology supports the following functions:
Ì reading 24 pre-defined autotest shortcut codes from barcode labels,
Ì reading appliance numbers from barcode labels.
Two Barcode systems are supported. Refer to Appendix A for detailed information.
Connect barcode reader to the DB-9 female BARCODE connector first. Use only
barcode reader supplied by your distributor or METREL directly.
Connecting barcode reader to the OmegaGT Plus / BetaGT Plus instrument