Operation Manual

MI 3309 BT DeltaGT Instrument description

Measurement is in progress.

Test result can be saved.

Connect the test lead to the S/EB test terminal.

Flex the mains cable of appliance during the test.

Check that the device under test is switched on (to ensure

that the complete circuit is tested).

Connect the cord to be tested to the IEC test terminal.

Test passed.

Test failed.

Measurement was aborted due to improper conditions

during the test.

RCD must be switched on.

Change position of mains cord before RCD test.

Indicate which connection in the test socket is over the

limit. (blank contact - under limit, filled contact - over limit)

2.4.1 Battery indication

The indication shows the charge condition of battery and connection of external charger.

Battery capacity indication.

Low battery.

Battery is too weak to guarantee correct result.

Replace or recharge the battery cells.

Instrument is connected to the mains (and is charging)