Operation Manual

MI 3309 BT DeltaGT Main menu and test modes
27
Options:
COM PORT USB: communication with PC
RS232: communication with external devices
(printer, scanner, RFID reader/ writer, PC)
PRINTER Selects the printer (can be a RS232 or Bluetooth printer).
PRN NAME Enters menu for searching Bluetooth printer.
INIT. BT DONGLE (PRN) Initializes Bluetooth dongle for the printer.
Keys:
 / 
Selects item to be changed.
TEST
Selects option and confirms.
ESC
Returns to Setup menu. Displayed settings are saved.
Note:
 For operation with some external devices the communication port is reconfigured
automatically while communication with the device is active. For example, if a
RS232 printer is connected to the output of the instrument it will work regardless
how the COM PORT is set.
4.8.3.1 Searching for the Bluetooth printer and pairing with instrument
In the Searching menu a Bluetooth printer can be found, selected and paired with the
instrument.
Figure 4.12: Selection of Bluetooth printer
Keys:
 / 
Selects the printer from the list of found Bluetooth devices.
TEST
Confirm selection of a printer (eg. ZebraPRN).
ESC
Returns to Communication menu without selection of a printer.
Notes:
 This operation must be performed when working with the printer for the first time or
if the printer was changed.
 Bluetooth printers can also be operated from some Metrel Android applications. In
this case the Bluetooth printer must be selected and paired with the instrument and
the Android device. For more information refer to chapter 8.3 Bluetooth
communication and Metrel Android application manual.