Operation Manual

MI 3309 BT DeltaGT Autotest sequences

Note:

 If more than 50 autotests are saved, »Out of custom autotest memory« message

is displayed.

6.3 Simple test

Simple test sequences are commonly used pre-programed autotest sequences with

possibility of fast testing. Fast testing mode can be enabled in Test speed setup function

in Setup menu. Refer to chapter 4.8.5 Test speed setup for more information.

Select Simple test function in Main menu.

Figure 6.23: Simple test menu

Keys:

 / 

Selects the test sequence from the list

START

Starts the selected test. See chapter 6.5 Carrying out autotest

sequences (Code, Simple and Custom).

ESC

Returns to Main menu.

Note:

 Test functions and limits of Simple tests are listed in Appendix C

6.4 Code Autotest

Code Autotest menu supports operation with pre-defined test codes, barcodes and RFID

tags.

The instrument supports the following functions:

 manual selection of pre-defined autotest shortcut codes;

 reading pre-defined autotest shortcut codes from barcode labels;

 reading pre-defined autotest shortcut codes from RFID tags;

 reading appliance ID numbers from barcode labels;

 reading appliance ID, name, Re-test date, and Location from RFID tags;

 reading pre-defined autotest shortcut codes and appliance ID numbers from

barcode labels (double barcode format);

 programming empty RFID tags;

 reading and executing pre-defined autotest shortcut bar codes and QR codes using

Bluetooth communication with android application on mobile devices;

 reading appliance ID, name, Re-test date, and Location from QR codes.

Refer to Appendix A Barcode and QR code formats for more information regarding

barcode and QR code labels.