Operation Manual

MI 3309 DeltaPAT General description
10
1.4 Standards applied
The DeltaPAT is manufactured and tested in accordance with the following regulations:
Electromagnetic compatibility (EMC)
EN 61326 Electrical equipment for measurement, control and laboratory
use – EMC requirements
Class B (Hand-held equipment used in controlled EM
environments)
Safety (LVD)
EN 61010-1 Safety requirements for electrical equipment for measurement,
control and laboratory use – Part 1: General requirements
EN 61010-031 Safety requirements for hand-held probe assemblies for electrical
measurement and test
Functionality
EN 61557 Electrical safety in low voltage distribution systems up to 1000 V
AC
and 1500 V
AC
– Equipment for testing, measuring or monitoring of
protective measures
Part 2 Insulation resistance
Part 4 Resistance of earth connection and equipotential bonding
VDE 0404-1 Testing and measuring equipment for checking the electric safety
of electric devices - Part 1: General requirements
VDE 0404-2 Testing and measuring equipment for checking the electric safety
of electric devices - Part 2: Testing equipment for tests after repair,
change or in the case of repeat tests
Other reference standards for testing portable appliances
VDE 0701-702 Inspection after repair, modification of electrical appliances –
Periodic inspection on electrical appliances
General requirements for electrical safety
NEN 3140 Guidelines for safe working practices
The IEE Code of Practice for In-service Inspection and Testing of
Electrical Equipment 3
rd
edition
Note about EN and IEC standards:
 Text of this manual contains references to European standards. All standards of EN
6XXXX (e.g. EN 61010) series are equivalent to IEC standards with the same
number (e.g. IEC 61010) and differ only in amended parts required by European
harmonization procedure.