Operation Manual

MI 3309 DeltaPAT Main menu and test modes
27
 The substitute leakage results will be lower if the nominal voltage is set to 110 V!
 Take care that the nominal voltage is set correctly!
4.6.5 Shortcut setup
In this menu the available list of available shortcut codes can be set. Basic Shortcuts only
makes the most important shortcuts available in the Shortcut menu while the Advanced
Shortcuts makes all shortcuts available from the Shortcut Menu.
Figure 4.11: Shortcut setup menu
Options:
BASIC
A limited list of (most popular) test sequences is set.
The complete list of test sequences (supported by METREL) is set.
ADVANCED
Keys:
Selects the list.
 / 
TEST
Confirms selection and returns to Setup menu.
ESC
Returns to Setup menu without changes.
4.6.6 Test speed setup
In this menu the instrument test speed can be set:
Figure 4.5: Test speed menu
Options:
Default option.
STANDARD
No pauses during tests (default).
FAST
Keys:
 / 
Selects the speed mode.
Confirms selection and returns to Setup menu.
TEST
Returns to Setup menu without changes.
ESC
Note:
 When enabling the fast mode then Visual inspection and Functional Test will be
automatically set to PASS.