Operation Manual

MI 3309 DeltaPAT Main menu and test modes
29
Selects a letter.
 / 
Selects the next letter.
TEST
Confirms name and returns to User data menu.
MEM
Deletes last letter.
ESC
Returns to User data menu without changes.
Notes:
 The selected user will be printed on the simple label (initials).
 Five different user names can be set.
4.6.9 Instrument data
In this menu the following instrument data is shown:
 producer name;
 instrument type;
 model number;
 calibration date;
 serial number;
 firmware and hardware version.
Figure 4.16: Instrument data menu
Keys:
Switches between Instrument data screens.
 /
TEST,
ESC
Returns to Setup menu.
4.6.10 Initial settings
In this menu the following instrument parameters can be set to their initial values:
 all measurement parameters in single test mode;
 LCD settings;
 language;
 communication settings;
 custom autotest sequences are replaced by factory pre-programmed ones.
Figure 4.17: Initial settings menu
Keys: