Operation Manual

MI 3309 DeltaPAT Single test
40
2.00 mA, --- mA]
Measuring time [2 s, 3 s, 5 s, 10 s, 30 s, 60 s, 120 s, --- s (continuous
measurement)]
TIME
Test circuits for substitute leakage - P measurement
Figure 5.21: Measurement of Substitute leakage - P current
Figure 5.22: Measurement of substitute leakage of accessible isolated conductive parts
of fixed installed DUTs
Substitute leakage - P measurement procedure
 Select the SUB. LEAKAGE-P function.
 Set the test parameters.
 Connect device under test to the instrument (see figure 5.21 and figure 5.22).
 Press the TEST key for measurement. To stop continuous measurement press
TEST key once again.
 Store the result by pressing MEM key (optional).