Operation Manual

MI 3309 DeltaPAT Single test
44
est circuits for touch leakage current measurement T
Figure 5.31: Measurement of touch leakage current
Figure 5.32: Measurement of touch leakage current on a fixed installed DUT
Touch leakage current measurement procedure
t to the instrument (see figure 5.31 and figure 5.32).
 sing MEM key (optional).
 Select the TOUCH LEAKAGE function.
 Set the test parameters.
 Connect device under tes
 Press the TEST key for measurement. To stop continuous measurement press
TEST key once again.
Store the result by pres