Operation Manual

MI 3309 DeltaPAT Automatic test sequences
55
Figure 6.7: Insulation resistance starting screen
After the measurement is carried out the Insulation result screen is displayed.
Figure 6.8: Insulation result screen
There are no special options to be set in the Insulation resistance result screen.
6.4.4 Substitute leakage measurement
The test is offered if it is applicable according to the autotest setting. The Substitute
leakage current starting screen is displayed first. Measurement and options in Substitute
leakage starting screen are described in chapter 5.2.5 Substitute leakage.
Figure 6.9: Substitute leakage starting screen
After the measurement is carried out the Substitute leakage result screen is displayed.
Figure 6.10: Substitute leakage result screen
There are no special options to be set in the Substitute leakage result screen.