Operation Manual

MI 3309 DeltaPAT Automatic test sequences
57
6.4.7 Substitute Leakage - P measurement
The test is offered if it is applicable according to the autotest setting. The Substitute
leakage - P starting screen is displayed first. Measurement and options in Substitute
leakage - P starting screen are described in chapter 5.2.6 Substitute leakage - P.
Figure 6.15: Substitute leakage - P starting screen
After the measurement is carried out the Substitute leakage - P result screen is displayed.
Figure 6.16: Substitute leakage - P result screen
Options in Substitute leakage - P result screen:
Proceeds with the next measurement.
NEXT
REPEAT
Repeats the test (use in case of multiple isolated / SELV / PELV
accessible points). Highest result will be stored.
6.4.8 Touch Leakage measurement
The test is offered if it is applicable according to the autotest setting. The Touch leakage -
starting screen is displayed first. Measurement and options in Touch leakage screen are
described in chapter 5.2.9 Touch leakage.
Figure 6.17: Touch leakage starting screen
After the measurement is carried out the Touch leakage result screen is displayed.
Figure 6.18: Touch leakage result screen
Options in Touch leakage result screen:
NEXT
Proceeds with the next measurement.
Repeats the test (use in case of multiple isolated / SELV / PELV
accessible points). Highest result will be stored.
REPEAT