Operation Manual

MI 3309 DeltaPAT Working with autotest results
61
7 Working with autotest results
7.1 Saving autotest results
After selecting Save results in Autotest results menu, the autotest results will be stored
in the internal memory of the instrument.
The appliance ID number and NAME can be added to the test results before the results
are saved:
Figure 7.1: Save results menu (Appliance ID)
Keys:
Edit Appliance ID data.
 / , TEST
MEM (OK) Saves Appliance ID.
ESC (DEL) Deletes last character of Appliance ID.
ESC (CANCEL) Returns to the previous menu.
An Appliance ID of up to 14 alphanumeric characters can be entered. The Appliance ID
can also be scanned with a barcode scanner or RFID reader/writer.
Figure 7.2: Save results menu (Appliance NAME)
Keys:
 / , TEST
Edit Appliance NAME data.
TAB (LIST) Offers last forty entered names.
ESC (DEL) Deletes last character of Appliance NAME.
ESC (CANCEL) Returns to the previous menu.
MEM (SAVE) Saves Appliance NAME and returns to Autotest result menu.
An Appliance NAME of up to 14 alphanumeric characters can be entered. The Appliance
NAME can also be scanned with a barcode scanner.
Figure 7.3: List menu (Appliance NAME)
Note
 40 custom made appliance names can be entered including 27 factory pre-
programmed names that are set by default.