Operation Manual
CS 2099 Eurocheck Eurocheck operation
10
4.2 Sample test report form
Caution:
q This sample test report form is suitable for Metrel installation test instruments like
MI3100 – EurotestEASI. It could be easily modified to suit other types of
instruments.
q It is not based on any regulation or recommendation.
Type of calibrated instrument
SN of calibrated instrument
Date of calibration
Temperature (°C)
Relative humidity (%RH)
Function Eurocheck value Measured value
0.5 Ω Ω
5 Ω Ω
LowΩ (±200 mA)
15 Ω Ω
0.5 Ω Ω
5 Ω Ω
Continuity (7 mA)
15 Ω Ω
2 MΩ MΩ Insulation 100 V
50 MΩ MΩ
2 MΩ MΩ Insulation 250 V
50 MΩ MΩ
2 MΩ MΩ Insulation 500 V
50 MΩ MΩ
2 MΩ MΩ Insulation 1000 V
50 MΩ MΩ
U
L-N
, 50 V V
U
L-PE
, 50 V V
U
N-PE
, 50 V V
Voltage, frequency
50 Hz Hz
LOOP+1 Ω Ω Fault loop impedance
LOOP+11 Ω Ω
LOOP+1 Ω Ω Trip-lock impedance IΔn=30
mA
LOOP+11 Ω Ω
50 ms ms
CURRENT LO PASS / FAIL
RCD trip-out time IΔn=30 mA
CURENT HI PASS / FAIL
Reference equipment SN Calibration certificate no. Date of calibration
Metrel Eurocheck
Operator’s name and signature