Operation Manual

MI 2092 Power Harmonics Analyser Section I General information
11
Bottom View Layout:
2 Plastic cover (fixes nylon strap to the instrument). There is a screw under this
cover that needs to be unscrewed when opening the instrument for service or
calibration purposes.
The Instrument contains no user serviceable parts. Service or
calibration must only be carried out only by an authorized dealer
3 Screw (unscrew to remove carrying strip or to open the instrument).
4 Label with measurement ranges.
5 Battery/fuse compartment cover.
6 Retaining screw (unscrew to replace batteries or blown fuse).
7 Rubber foot.
2.4. Standard accessories
Current probes:
● Current clamp-on CTs, model S 1000 A / 1 V, 3 pcs
● Current transformers (optional)
Voltage cables, Current cables:
● Probe tips, 3 pcs
● Alligator clips, 4 pcs
● Voltage measurement cables, 6 pcs
● Mains cable
● RS 232 cable
● Soft carrying bag
● Instruction manual
● Product verification data
● Warranty declaration
Windows PC software:
● PC analysis and control software package
2.5. Optional accessories
See attached sheet for a list of optional accessories that are available on request from
you distributor.