Operation Manual

MI 2092 Power Harmonics Analyser Section III Operation manual

· Up/Down limits: 10 %

· Buffer mode: roll-over

· Selected channels: none

· Selected harmonic: none

· Voltage multiplier(K): 1

· Current range: 1000 A

· Connection: 4w

· Sync. frequency: 50 Hz

· Sync. input: AUTO

· Serial port rate: 57600

UPGRADE The possibility for later implementation of modem by order. The

instrument serial number must be attached to an order for the code.

Use UP / DOWN keys for increment / decrement number of selected place

and LEFT / RIGHT to select place.

Note:

It is only necessary to enter the code once and is valid

also for later software upgrades.

3.3. Recorder (Data Logging) sub-menu

Use this sub-menu to set Data Logging parameters and log START/STOP conditions.

Note that actual starting or stopping can only be effected from the main RECORD

menu.

fig. 9

Use UP or DOWN key to select the appropriate parameter.

START and STOP

There are two ways of starting and stopping recording.

In Manual mode, recording starts immediately if period recording is OFF.

If Periodic Recording is ON, there is a “null” seconds delay.

STOP in manual mode is immediate.