Operation Manual

MI 2092 Power Harmonics Analyser Section III Operation manual
28
For Periodic Analysis, there are four further information lines:
periods.
Number of recorded periods from start of data logging.
int.pr.
Current integration period (IP) in seconds
max.
Aprox max. number of periods that can be saved (in Linear Buffer mode only)
remain
Remaining time in the current integration period
power N° of power ON/OFF events during the current recording period.
5. Energy
This function displays the various energy registers.
fig. 14: Energy Registers
n Top three lines: Total cumulative registers of
Active energy
Ep in kWh
Reactive capacitive energy
EQC in kvar
Reactive inductive energy
EQi in kvar
n SUBTOTAL lines: Subtotal cumulative registers of
Active energy
Ep in kWh
Reactive capacitive energy
EQC in kvar
Reactive inductive energy
EQi in kvar
To reset the Total and / or Subtotal registers:
1. Press SELECT key. The password entry screen is opened.
2. Enter the password
3. After confirming the password, press ENTER to reset the Subtotals or ESC to quit.
4. After resetting subtotals, press ENTER to reset the Totals or ESC to quit.