Operation Manual

OmegaGTPlus / BetaGTPlus Data operations
74
Building data for items
Appliance no.
Up to 10 alphanumeric or special characters can be entered.
Appliance number can also be read with a barcode reader.
Test site,
Location,
Appliance name
Up to 15 alpha-numeric or special characters can be entered.
Names can also be selected from the list of 100 predefined names
for each parameter.
Retest period
2 numeric characters can be entered.
Repairing code
Up to 20 alpha-numeric or special characters can be entered.
Comments
Up to 25 alpha-numeric or special characters can be entered.
All parameters added to the autotest results have in general a possibility to be
replicated or default set to blank when saving new autotest results. Appliance number
can also be automatically incremented when new autotest sequence is finished. For
detailed description refer to chapter
3.9.6 Instrument settings.
Notes:
Ì The date and time are automatically attached to the saved results.
Ì The autotest results cannot be stored if the Appliance no. field is empty.
Ì User field cannot be edited.
6.2 Recall / delete / send to output of results
After entering selection and searching the recall menu appears. The instrument shows
complete numbers of found results.
Memory recall menu – list of stored autotest results
Keys:
À / ¿
Select stored autotest result.
F1 (PgUp)
Opens previous page in list of test results.
F2 (PgDown)
Opens next page in list of test.
F3 (SEND)
Sends autotest results of selected appliance to one of output devices,
see 6.2.3 Downloading and printing results.
F4 (SENDall)
Sends all autotest results from selection to one of output devices, see
6.2.3 Downloading and printing results.
F5 (DELETE)
Deletes results, see 6.2.2 Deleting Results.
ENTER
Opens results view of selected autotest result, see 6.2.1 Results
view..
ESC
Returns to Main menu.