Operation Manual
MI 3310 / MI 3310A SigmaGT Appendix C – Country notes
134
Pre-programmed autotest sequences table (cont’d)
Autotest shortcut code
11 12 13 14
Description
KL1 30mA
PRCD
KL1 3L+N(VL
2E)
KL2
LEKSTROOM
KL1
LEKSTROOMTANG
Visual test
Earth bond
Output 200 mA 200 mA
200 mA
Limit
0.30 0.30
0.30
Time 5 s 5 s
5 s
Insulation
Output 500 V 500 V
Limit
1.00 M 1.00 M
Time 5 s 5 s
Insulation
(probe)
Output
Limit
Time
Sub leakage
Output
Limit
Time
Sub leakage
(probe)
Output
Limit
Time
Differential
leakage
Output
230 V
Limit
0.5 mA
Time
10 s
Touch leakage
Output
Limit
Time
Power
Output
230 V
Limit
Time
10 s
TRMS clamp
current
Output
Enkel
Limit
0.5 mA
Time
5 s
Polarity test
RCD test
Mode Single
Type AC
Id RCD 30 mA
Multi 1
Fase (+)
Test PRCD
Note:
When polarity test in enabled in autotest sequence then earth bond resistance is
performed between IEC test connector (PE terminal) and test socket (PE
terminal). If polarity test is disabled in autotest sequence, earth bond test is
perfomed between EB/S test probe and test socket (PE terminal).