Operation Manual

MI 3310 / MI 3310A SigmaGT Autotest sequences
85
- Old test results are not occupying the instrument’s memory and can be
temporarily uploaded only for the purpose of re-testing,
- Test results and DUT data can be moved / shared among different test
instruments,
- DUT data can be pre-entered on the computer and then sent to the instrument.
6.3.1 Selecting a project autotest
The first step when performing project autotests is to recall the appropriate stored DUT
data from the instruments memory. The procedure is similar as if test results are to be
recalled from the instrument’s memory.
Project autotests main menu
When searching for stored autotest results the following filters can be used to narrow
the hits:
- Device number,
- User,
- Test site,
- Location,
- Date from and date to.
Keys:
 / 
Select filter line.
 / , Alphanumeric Edit selected filter.
FIND (F1) Starts search after filters are set correctly.
UNDO (F2) Undo latest change.
TYPE (F3) Selects parameter line type.
ESC
Returns to Main menu.
Notes:
 To change the selected parameter line type, press the TYPE (F3) key and the
»parameter type« will become highlighted (e.g. DUT). The keys  and  can then
be used to change the parameter type and by pressing ENTER key the choice can
be confirmed. Once the parameter types have been set up, the data required to filter
the files can be inserted. Filter information can be inserted via the alphanumeric
keypad or, in some filter fields such as user, can also be selected from a predefined
list by pressing the LIST (F4) key. The DUT number field can also be read using a
barcode reader.
 By placing a »*« (shift + “2”) in a particular field, tells the instrument not to search the
associated filter field. When searching, the instrument will therefore ignore data in