Operation Manual

MI 3310 / MI 3310A SigmaGT Autotest sequences

this parameter and go on to find all the DUTs that conform to data placed in the

other filter fields.

 To find all stored results, enter »*« in the all fields (excluding DATE where the

correct from and to dates must be entered).

If the search filters are set up correctly and the DUTs exist in the units memory, the

Project autotests result menu will be displayed.

While recalling stored results, the instrument shows a bar graph and a ratio of files

found compared to files stored in memory (e.g. 7/11 implies 7 results have been found

to meet the filter criteria out of a potential 11 results stored in the flash memory).

Project autotest result menu

Keys:

 / 

Select the DUT that should be retested. PgUp (F1)

PgDown (F2)

ENTER

Recalls autotest project results for selected DUT.

START

Starts running new autotest for selected DUT, see 6.3.2 Starting a

project autotest

ESC

Returns to Main menu.

Note:

 Barcode reader can also be applied for selecting the DUT, see chapter 6.4 Working

with barcode / RFID tag.

DUT tickers

Each DUT is marked with a ticker. The ticker appears at the right of the DUT number

and helps to speed up finding DUTs to be retested.

The meaning of the tickers is as follows:

PC The stored DUT data was uploaded from PC

PC The stored DUT data was uploaded from PC and has been retested

I The stored DUT data was performed with the instrument and stored.

I The stored DUT data was performed with the instrument and stored and has

been retested.

Recalling autotest project results for selected DUT

By pressing ENTER key on an DUT, more information regarding the DUT results and

data can be viewed.