Operation Manual

MI 3310 / MI 3310A SigmaGT General description
9
Electromagnetic compatibility (EMC)
EN 61326-1 Electrical equipment for measurement, control and laboratory use -
EMC requirements -- Part 1: General requirements
Class B (Portable equipment used in controlled EM environments)
Safety (LVD)
EN 61010-1 Safety requirements for electrical equipment for measurement,
control, and laboratory use – Part 1: General requirements
EN 61010-2-030 Safety requirements for electrical equipment for measurement, control
and laboratory use – Part 2-030: Particular requirements for testing
and measuring circuits
EN 61010-031 Safety requirements for electrical equipment for measurement, control
and laboratory use - Part 031: Safety requirements for hand-held
probe assemblies for electrical measurement and test
EN 61010-2-032 Safety requirements for electrical equipment for measurement,
control, and laboratory use - Part 2-032: Particular requirements for
hand-held and hand-manipulated current sensors for electrical test
and measurement
Functionality
VDE 0404-1 Testing and measuring equipment for checking the electric safety of
electric devices - Part 1: General requirements
VDE 0404-2 Testing and measuring equipment for checking the electric safety of
electric devices - Part 2: Testing equipment for tests after repair,
change or in the case of repeat tests
VDE 0701-0702 Inspection after repair, modification of electrical appliances –
Periodic inspection on electrical appliances
General requirements for electrical safety
EN 60204-1 Ed.5 Safety of machinery - Electrical equipment of machines - Part 1:
General requirements
EN 60439 Low-voltage switchgear and controlgear assemblies
EN 61439-1 Low-voltage switchgear and controlgear assemblies - Part 1:
General rules
AS / NZS 3760 In-service safety inspection and testing of electrical equipment
NEN 3140 Operation of electrical installations - Additional Netherlands
requirements for low-voltage installations
Note about EN and IEC standards:
Text of this manual contains references to European standards. All standards of EN
6xxxx (e.g. EN 61010) series are equivalent to IEC standards with the same number
(e.g. IEC 61010) and differ only in amended parts required by European harmonization
procedure.
Note:
 Various devices and appliances can be tested by SigmaGT and in further text the
common DUT (abbreviation for Device Under Test) is applied.