Operation Manual

MI 3310 / MI 3310A SigmaGT Autotest sequences

Key:

ESC

Returns to Barcode/tag menu.

Once the data from RFID tag have been successfully received, the following menu is

displayed:

RFID tag menu

Keys:

 / 

Select the option.

ENTER

Opens menu for selected option.

ESC

Returns to Barcode/tag menu.

If no test results were stored in RFID tag, the View results option won’t be displayed.

The following actions can be performed:

- New reading from RFID tag,

- View autotest sequence,

- View autotest results,

- Start autotest sequence.

Viewing autotest sequence from RFID tag

Select View autotest in TAG menu and press ENTER key to confirm. Refer to chapter

6.2.1 Viewing/modifying and saving of existing custom autotest.

Starting autotest sequence from RFID tag

Select Start new autotest in TAG menu and press ENTER key. Refer to chapter 6.5

Performing autotest sequences - appliances.

Viewing autotest results from RFID tag

Select View results in TAG menu and press ENTER key to confirm. Refer to chapter

7.2 Recalling results.

Sending an autotest sequence to RFID tag

From the Autotest custom menu press the SEND key. Selected autotest sequence is

loaded to the RFID tag using RFID reader/writer.

See RFID reader/writer user manual for more information.

Sending an autotest sequence/results to RFID tag

Autotest sequence/results can be sent to RFID TAG from the Save results or Recall

memory menu. Press the SEND key. When sending data from Recall results menu