Manualshelf

Operation Manual

ManualsBrandsMetrel ManualsMeasuring ToolSigmaGT MI 3310
919293949596979899100
MI 3310 / MI 3310A SigmaGT Autotest sequences
96
Substitute leakage test menu
Keys:
START
Starts the substitute leakage current measurement.
Proceeds with the next substitute leakage current measurement (in
continuous measurement mode only).
Proceeds to the next autotest sequence measurement (in single
measurement mode only).
ENTER
Proceeds to the next autotest sequence measurement (in continuous
measurement mode only).
REPEAT (F3) Repeats the substitute leakage current measurement.
SKIP (F4) Skip substitute leakage current measurement.
6.5.6 Substitute leakage – S probe measurement
Measurement is described in chapter 5.2.5 Substitute leakage – S probe.
If the substitute leakage test fails or was skipped other tests will not be carried out
because of safety.
Substitute leakage - S test menu
Keys:
START
Starts the Substitute leakage current – S probe measurement.
Proceeds with the next substitute leakage current –S probe
measurement (in continuous measurement mode only).
Proceed to the next autotest sequence measurement (in single
measurement mode only).
ENTER
Proceeds to the next autotest sequence measurement (in continuous
measurement mode only).
REPEAT (F3) Repeats the substitute leakage current – S probe measurement.
SKIP (F4) Skips substitute leakage current – S probe measurement.