Operation Manual

MI 3310 / MI 3310A SigmaGT Autotest sequences
97
6.5.7 Differential leakage current
Measurement is described in chapter 5.2.6 Differential leakage current.
If the differential leakage test fails or was skipped other tests will not be carried out
because of safety.
Leakage current test menu
Keys:
START
Starts the leakage current measurement.
Proceeds with the next leakage current measurement (in continuous
measurement mode only).
Proceed to the next autotest sequence measurement (in single
measurement mode only).
ENTER
Proceeds to the next autotest sequence measurement (in continuous
measurement mode only).
REPEAT (F3) Repeats the leakage current measurement.
SKIP (F4) Skips leakage current measurement.
6.5.8 Touch leakage current measurement
Measurement is described in chapter 5.2.7 Touch leakage current.
If the touch leakage test fails or was skipped other tests will not be carried out because
of safety.
Touch leakage test menu
Keys:
START
Starts the touch leakage current measurement.
Proceeds with the next touch leakage current measurement (in
continuous measurement mode only).
Proceed to the next autotest sequence measurement (in single