Operation Manual

MI 3310 / MI 3310A SigmaGT Instrument description
18
Warning symbols
Remove the EB/S connection, especially if it is connected to
any part that will begin to rotate or move when power is
applied.
Connect the test lead to the EB/S test socket.
Warning!
A high voltage is / will be present on the instrument output!
(Insulation test voltage, or mains voltage).
The DUT should be switched on (to ensure that the complete
circuit is tested).
Connect the lead to be tested to the IEC test terminal.
Connect current clamp adapter in this test.
PASS /FAIL indication
Test passed.
Test failed.
Some tests in the autotest sequence were skipped, but all
performed tests passed.