Operation Manual

MI 3310 / MI 3310A SigmaGT Main menu and test modes

4.2 Instrument main menu

From the Main menu all the instrument functions can be selected.

Instrument main menu

Keys in instrument main menu:

 / 

Select one of the following menu items:

<AUTOTEST ORGANIZER>, pre-defined autosequences, covering

requirements of standard;

<AUTOTEST CUSTOM>, custom prepared autosequences;

<PROJECT AUTOTESTS>, project autosequences;

<BARCODE / TAG>, working with barcode and RFID tags;

<SINGLE TEST>, test / measuring functions alone;

<EDIT APPLIANCE DATA>, see chapter 4.2.5;

<RECALL/DELETE/SEND MEMORY>, working with results, see chapter 7;

< UPLOAD DATA / EDIT LISTS / CHECK LOG>, data transfer possibilities,

see chapter 7.5;

<SETUP> the menu for general settings of the instrument, see chapter 4.2.8.

ENTER

Confirms selection.

ESC

Returns to the Instrument main menu.

Note:

 The ESC key must be pressed more than once to return to Main menu from any

submenu or selected function.

4.2.1 Autotest organizer menu

This menu offers creation and performing autotest sequences compatible with proper

standards. The sequence setup and its parameters are exactly the same as suggested

in the applied standard, VDE 0701-0702 or NEN 3140.

When an autotest sequence has been created in the autotest organizer, it can be run as

an autotest or stored in the Custom Autotest menu.