Operation Manual

MI 3310 / MI 3310A SigmaGT Main menu and test modes
39
4.2.8.8 Communication settings
In this menu, the communication port (RS232, USB or Bluetooth) for communication
with external devices (PC, scanner, printer, Android mobile device) can be set. Also
baud rate for communication with PC can be set. Following menu will be displayed:
Communication menu
Keys in set communications menu:
 / 
Selects option.
ENTER
Confirms selection and opens menu of selected option.
ESC
Returns to Setup menu.
Communication settings
Keys in baud rate menu:
 / 
Selects the proper option.
SAVE (F1) Confirms selection and returns to Set communication menu.
ESC
Returns to Set communication menu without changes.
Keys in set communication type menu:
 / 
Selects the option to be set.
Selects initialization of Metrel Bluetooth dongle A 1436 for printer
(offered if dongle is needed for selected option).
EDIT (F1)/
ENTER
Enters selection of device and communication type.
Starts initialization of Bluetooth dongle A1436 (offered if dongle is
needed for selected option).
SET BT (F2)
Searching for external Bluetooth devices and pairing them with the
instrument, see chapter Wireless (Bluetooth) communication setup for
more information.
ESC
Returns to Set communication menu.
Keys in selection of device and communication type: