Operation Manual

MI 3310 / MI 3310A SigmaGT Main menu and test modes
41
SEARCH (F2) Searches for Bluetooth devices within the range.
Once Bluetooth devices were found, instrument displays their names and Bluetooth
addresses. Up to 6 Bluetooth devices can be displayed.
List of detected Bluetooth devices Set selected Bluetooth device as printer or
scanner
SEARCH (F2) Searches again for Bluetooth devices within the range.
/
Selects Bluetooth device to be paired with instrument.
SET AS (F3) Selected Bluetooth device can be set as printer or scanner. Use
/ keys for selection.
SAVE (F1),
ENTER
Confirms selected option in SET AS sub-menu.
ESC
Returns to Edit Bluetooth device or Set Communication menu.
When Bluetooth devices were set, they can communicate with the instrument using
Bluetooth technology if communication type for printer and/or scanner is set to
Bluetooth (Refer to paragraph 4.2.8.8 Communication settings).
Notes:
Using Bluetooth communication the following devices are supported: printer O’Neil
MF2te Bluetooth, barcode reader Socket mobile CHS 7E2, printer Zebra LP2824
(via Bluetooth dongle A 1436).
For Bluetooth communications with Android mobile devices and PCs the Bluetooth
settings must be set on the mobile device / PC.
4.2.8.9 Password
In password protected actions, it is necessary to enter the password before deleting or
editing the protected data. The instrument requires a password and it will not allow
changes unless the correct password has been entered.
Password menu