User Manual

MIO Console Key Commands
320
Some of the key-commands depend upon whether or not you are running MIO Console in legacy mode. In
Legacy Mode, there are 5 Panels in the MIO Console window, whereas if you disable legacy mode there are
only 5 Panels in the MIO Console window.
TableA.2.Pane Select Key Commands in 2d Expanded Mode
Command Key Sequence
Select Pane: I/O Control
⌘1 (Command + 1)
Select Pane: +DSP
⌘2 (Command + 2)
Select Pane: Recording
⌘3 (Command + 3)
TableA.3.Pane Select Key Commands in Legacy Mode
Command Key Sequence
Select Pane: I/O Control
⌘1 (Command + 1)
Select Pane: Mixer
⌘2 (Command + 2)
Select Pane: Routing
⌘3 (Command + 3)
Select Pane: +DSP
⌘4 (Command + 4)
Select Pane: Recording
⌘5 (Command + 5)
MIO Console also provides many key-commands via the menus; these commands cannot be edited:
TableA.4.Menu Key Commands
Command Key Sequence
MIO Console > Preferences
⌘, (Command + comma)
MIO Console > Hide
⌘H (Command + H)
MIO Console > Hide Others
⌘⇧H (Command + Shift + H)
MIO Console > Quit
⌘Q (Command + Q)
File > Open
⌘O (Command + O)
File > Template
⌘⇧O (Command + Shift + O)
File > Close
⌘W (Command + W)
File > Save
⌘S (Command + S)
File > Save As
⌘⇧S (Command + Shift + S)
Edit > Undo
⌘Z (Command + Z)
Edit > Redo
⌘⇧Z (Command + Shift + Z)
Edit > Cut
⌘X (Command + X)
Edit > Copy
⌘C (Command + C)
Edit > Paste
⌘V (Command + V)
Edit > Select All
⌘A (Command + A)
Recording > Set Record Folder
⌘T (Command + T)
Recording > Set Playback Folder
⌘Y (Command + Y)
Recording > Recording Preferences
⌘R (Command + R)
Mixer > Create New Mono Mixer Strip
⌘⇧N (Command + Shift + N)
Mixer > Create Multiple Mixer Strips
⌘⇧M (Command + Shift + M)