User Manual

2882 Quick Start Guide

Analog

1-8

Cans

L/R

Digital

L/R

Digital

L/R

Digital

L/R

Digital

L/R

ADAT 1-8

Toslink 1-2

ADAT 1-8

Toslink 1-2

Green: Routable Inputs

Red: Routable Outputs

Analog

1-8

Figure 1.2: 2882 Routing

Connect the 2882

Go to your computer and install the driver and MIO Console application driver from the included disc (this

will require a restart). Please see the section on software installationif you need clarification. Connect the

FireWire cable between the 2882 and your computer, then go to the System Preferences and select it as the

system’s sound input and output.

Take a listen

Now we’re ready to listen. Don't launch MIO Console yet; open iTunes, turn its volume slider down and play

some music. Bring the volume up to a comfortable level, and try the Dim and Mute buttons. Enjoy simply

listening to music.

MIO Console

Once you’ve listened for a while, launch MIO Console. If you're launching MIO Console for the first time,

you'll see the factory default setup; more information on this is available in the Saving and Recalling Your

Setups section of this manual.

Using Legacy Interfaces

If you are also using an older Legacy interface without a 2d card, open the application’s preferences and

turn on “Legacy Support”. You will need to quit and relaunch MIO Console. All Metric Halo interfaces

manufactured since 2007 contain a 2d card.