User Manual

+DSP
314
other side of the Channel Multiplier block. You can add additional processing to both the Envelope
and Frequency outputs to make much more interesting synth tones.
Exponential ADSR is a monophonic envelope processor and a new note on message will steal the
voice from a currently active note-on message.
Parameters:
Attack [0, 1k] ms
The amount of time for the volume envelope to reach the peak volume after the detection of the
note on message.
Decay [0, 5k] ms
The amount of time for the volume envelope to decay to the sustain volume after the detection
reaching the peak level.
Sustain [-60, 0] dB
The sustain level of the signal in dB below the peak volume.
Release [0, 5k] ms
The amount of time for the volume envelope to decay back to muted after the plugin detects a
corresponding note-off message.
Band Split
• Synopsis: BandSplit – Crossover for Mobile I/O
• Category: Math
• Channels: 1, 2
Description:
Band Split is a mono in, two out or stereo in, four out crossover module. The input is processed by a
24dB/octave Linkwitz-Riley filter, with frequencies below F output from the “Low” output and those
above F output from the “High” output.
Parameters:
F [10, 20k]
Sets the crossover frequency (in Hz) of the bandsplit.