User Manual

5. 2882 Users Guide

2882 Overview

Figure 5.1: Mobile I/O 2882

What it is

Mobile I/O is a portable, high–quality, modular FireWire–based multi-format audio converter, interface, and

processor for professional audio applications. The 2882 model line is equipped with eight balanced analog

inputs (4 on XLR and 4 on 1/4" TRS), two channels of Digital I/O (AES/EBU and S/PDIF), eight channels of

ADAT® optical I/O support (switchable to 2 channel TOSLINK), and eight balanced analog outputs (1/4" TRS),

as well as wordclock in/out and 2 IEEE 1394 FireWire connectors that support 400 Mbs operation. All inputs

and outputs are capable of 24-bit/ 96kHz operation.

What it has

• 18 simultaneous input channels and 20 simultaneous output channels

• full 24 bit/96kHz audio

• 8 independent channels of mic-pre with switchable phantom power

• Fully Portable Capabilities – Bus and Battery Powerable

• Rack Mount Kit

• 44.1, 48, 88.2, 96kHz Sampling Rates

• 24 bit 110 dB Dynamic Range A/D converters

• 24 bit 120 dB Dynamic Range D/A converters

• 8 Balanced Analog Inputs – 4 XLR, 4 TRS 1/4"

• 8 Balanced Analog Outputs – 8 TRS 1/4"

• Selectable stereo Digital Inputs AES/EBU or S/PDIF

• Stereo Digital Outputs AES/EBU and S/PDIF

• 8 ADAT® Optical Inputs and Outputs (or 2 TOSLINK)

• Sample Rate Conversion (SRC) on Digital I/O

• Built-in 80-bit, fully interpolated, multi-bus mixer for near-zero latency foldback of all input channels

and all DAW busses simultaneously

• Full cross point router for I/O management

• Word Clock 1x, 256x

• Front Panel Metering for Analog Inputs and Outputs

• Full console metering of every channel and mix bus

• Total recall of every console parameter

Options (can be installed before or after purchase)

• +DSP license