User Manual

1. 2882 Quick Start Guide

Figure 1.1: Mobile I/O 2882

Prepare the unit for use

Unpack the 2882 and make sure all the parts are there:

• One Mobile I/O 2882 unit

• One IEC Power Cord appropriate for your area

• One 24-volt 48-watt world-ready external power supply

• One 30” IEEE 1394 9-pin to 6-pin FireWire Cable

• One 4.5 meter IEEE 1394 9-pin to 6-pin FireWire Cable

• Two Rack Ears w/ fasteners

• Rubber feet

• MIO Software CD-ROM

• Warranty/Registration Card

Bask in the look and feel of the 2882! Once you’re finished, connect the power supply, and connect your

monitors to Analog Out 1/2. Many people find it useful to put a pad between their amps or powered monitors

and the 2882’s outputs; this allows the 2882 to work at full digital resolution without overdriving the amplifiers.