User Manual

+DSP
292
Invert {Off, On}
When enabled, inverts the delayed signal relative to the input polarity.
Enable {Off, On}
Enable the tap. When enabled, the tap generates output from on its dedicated output port and
contributes to the summed output.
Delay(samp) [0, 1.023k] samps
Sets the delay, in samples, between the input and output of this tap.
Gain [-160, 10] dB
Sets the gain of the delayed signal.
Invert {Off, On}
When enabled, inverts the delayed signal relative to the input polarity.
Enable {Off, On}
Enable the tap. When enabled, the tap generates output from on its dedicated output port and
contributes to the summed output.
Delay(samp) [0, 1.023k] samps
Sets the delay, in samples, between the input and output of this tap.
Gain [-160, 10] dB
Sets the gain of the delayed signal.
Invert {Off, On}
When enabled, inverts the delayed signal relative to the input polarity.
Enable {Off, On}
Enable the tap. When enabled, the tap generates output from on its dedicated output port and
contributes to the summed output.
Delay(samp) [0, 1.023k] samps
Sets the delay, in samples, between the input and output of this tap.
Gain [-160, 10] dB
Sets the gain of the delayed signal.
Invert {Off, On}
When enabled, inverts the delayed signal relative to the input polarity.
Enable {Off, On}
Enable the tap. When enabled, the tap generates output from on its dedicated output port and
contributes to the summed output.
Delay(samp) [0, 1.023k] samps
Sets the delay, in samples, between the input and output of this tap.
Gain [-160, 10] dB
Sets the gain of the delayed signal.