User Manual

ULN-2 Users Guide

• switchable +4/-10 level

• 2 channels balanced Monitor output with front panel level control

• Connect these outputs directly to power amps or self powered monitors

• 4-pin XLR power port for use with broadcast batteries

• Compatible with any 4-pin XLR power system with the following characteristics: 9v - 30v DC, Pin

4 Hot, 15 Watts

• TOSLINK connectors for ADAT Optical or Optical SPDIF I/O

• Wordclock input/output on BNC connectors

• 256x Wordclock input/output on BNC connectors

• Stereo S/PDIF input/output on RCA connectors

• Stereo AES/EBU input/output on XLR connectors

• 2 IEEE 1394 (FireWire) ports (400 Mbps)

• 1 2.1mm DC power jack (9v - 30v, center positive, 15 Watts)

Signal Flow

Figure 6.11: ULN-2 Signal Flow

Making connections to the ULN-2