Operating instructions

16 10/04/2015
Electronic mobile POCLAIN HYDRAULICS
Description
Functioning
Display the Informations and the Parameters
Press the key -------and--------to navigate into the Informations and the Parameters.
When the tuning light signal is off-------the SD Display 1.5 displays an Information
O (the value P can not be changed).
When the tuning light signal is on-------the SD Display 1.5 displays a Parameters
O (the value P can be changed).
Tune the Parameters values
Only the Parameters values can be tuned (the tuning light indicator is on-------).
1 - Press the key-------to enter into the tuning mode.
The tuning light indicator flashes---------.
2 - Press the key--------to increase the value
P, or the key--------to decrease the value P.
3 - Press the key-------to exit from the tuning mode.
The tuning light indicator stops flashing--------(but it still on).
Display the Error(s)
The flashing error light indicator-------indicates the presence of error(s).
1 - Press the key--------to display the errors(s) and--------to come back into the previous error(s).
2 - Press the key--------to display the Informations and the Parameters.
The error light indicator is off-------when the error(s) is(are) corrected.
N° Function
M
Error light indicator
N
Tuning light indicator
O
’’Information’’, ’’Parameter’’ or ’’Error code’’ line
P
’’Value’’ or ’’Error identification’’ line
Q
’’Previous’’ or ’’Decrease of the value’’ key
R
’’Enter’’ or ’’Exit’’ key
S
’’Next’’ or ’’Increase of the value’’ key
Can not be changed
Can not be changed
Can be changed
Can be changed