Operating instructions

10/04/2015 85
POCLAIN HYDRAULICS Electronic mobile
Electronic control unitsElectronic componentsConnectorsCables Displays
SMARTDRIVE™ CT CABLE
Commercial name CABLE-SD-CT-200-60-5000 CABLE-SD-CT-300-86-5000
Part number A48878D A48877C
Function
Connect SmartDrive™ CT ECU to the machine wiring and have a male
communication connector.
Compatibility Transmission management with SmartDrive™ CT ECU.
Features
Length of cable 5m 5m
Operating temperature - 40°C to 85°C [-40 °F to 185°F]
Ingress protection
IP67 according to IEC 60529
Number of wires 60 86
Wire section 0,75 mm² [0.029 in²] for signals
1 mm² [0.039 in²] for VBAT_P and power outputs
1,25 mm² [0.049 in²] for VBAT_D1, VBAT_D2, VBAT_D3 and -VBAT
Insulation diameter
1,6 to 2,2 mm [0.063 to 0.086 in]
Each wire is numbered with locating pin and connector.
For the CAN bus, the identification is performed by different colour for each pin. (see table - CAN Wire colour)
Dimensions
The non used wires should be individually insulated because of possible voltage.
200 ± 20
[7.87 ± 0.79]
5000 ± 100 [197 ± 3.94]
300 ± 10
[11.82 ± 0.40]
1000 ± 20
[39.36
±
0.79]
SD-CT-300
SD-CT-200
CAN Wire colour
Function Colour
CAN1_High White
CAN1_Low Green
CAN2_High White
CAN2_Low Red
CAN3_High White
CAN3_Low Blue