User's Guide
Table Of Contents
- Remote Terminal Unit M717
- Table Of Contents
- Introduction
- Installation
- Register the RTU to the M2M Gateway
- The SDI Connector
- The MPI Connector
- The Micro USB Service Connector
- About the Data Acquisition Subsystem
- SDI-12 Sensors
- Create a New Template From an Existing One
- Create a New Template From Scratch
- Interface to a Davis Vantage Pro Console
- Interface to a Thies TDL14 or DL16 Data Logger
- Mechanical Installation
- Operation
- Configuration
- Commands
- General Commands
- help
- ver
- echo
- ps
- date
- log
- attr
- pin
- hwid
- connect
- xfer
- fwupdate
- reboot
- exit
- Data Acquisition Commands
- dacq
- dacq info
- dacq sample
- dacq retrieve
- dacq abort
- dacq date
- dacq interval
- dacq direct
- dacq t
- hist
- hist info
- hist stat
- hist map
- hist purge
- Data Acquisition Legacy Commands
- sdi t
- thi t
- thi direct
- Communication Commands
- net
- net get
- net up
- net down
- net session
- modem
- modem direct
- modem pwrdown
- modem pwrup
- modem reset
- modem mode
- File System Commands
- ls
- mkdir
- cd
- cp
- pwd
- rm
- cat
- Command Line Interface Error Messages
- Attributes
- Technical Specifications
6. Technical Specifications
Parameter
Value
Cellular modem
GPRS/EDGE/WCDMA/LTE Cat 4
Interfaces
RS-232, RS-422, RS-485, CAN, SDI-12, USB 2.0
Supported protocols
TCP/IP, HTTP, HTTPS
Internal storage
16 Mbytes, non-volatile
Sensor sampling interval
Programmable (minutes, hours, days, weeks)
Communication interval
Programmable (minutes, hours, days, weeks)
Power supply
External 6 to 30 Volt (M12 connectors); 5 Volt (USB)
Power consumption
Standby, receive enabled: typ. 2.8 mA (at 12 V)
Standby, receive disabled: typ 0.8 mA (at 12 V)
Transmit: max. 300 mA (at 12 V), max. 600 mA (at 6 V)
Operating temperature
-30ºC to +60ºC
Dimensions
110/75/55 mm
Weight
400 g
Environmental protection class
IP66
42