Brochure

❯ Beep for continuity
For quick checking of the connections in ohmmeter mode.
❯ Protection on all calibres
Even in ohmmeter mode, the application of a voltage of 400 Veff does not
cause any damage. This function is protected, without a fuse, by a reliable,
ultra-fast electronic system. The inputs can resist transient pulses of up to
6 kV. The current ranges, on the other hand, are protected by 600 V high
rupture capacity (HRC) fuses.
❯ Safety alarms
– blown fuses indicated by a LED
– in ohmmeter mode, audible alarm if there is a mains AC voltage on the
input. There is also a LED which indicates if any fuses blow
❯ AC current measurements
Delivered with a current clamp, the MX 2B measures AC currents up to 200 A,
in total safety, as the MN 09 clamp prevents any opening of the main circuit.
❯ Acknowledged as rugged
– water-resistant casing
– shockproof sheath
– smooth surface for simple maintenance
❯ Safety in all circumstances
– double insulation up to 1,500 V
– the SECUR’X locking system prevents accidental disconnection of the
measurement leads and unwanted opening of the battery compartment.
FRANCE
Chauvin Arnoux
190, rue Championnet
75876 PARIS Cedex 18
Tel: [phone]
Fax: [phone]
[e-mail]
www.chauvin-arnoux.com
UNITED KINGDOM
Chauvin Arnoux Ltd
Unit 1 Nelson Ct, Flagship Sq, Shaw Cross Business Pk
Dewsbury, West Yorkshire - WF12 7TH
Tel: [phone]
Fax: [phone]
[e-mail]
www.chauvin-arnoux.com
MIDDLE EAST
Chauvin Arnoux Middle East
P.O. BOX 60-154
1241 2020 JAL EL DIB - LEBANON
Tel: [phone]
Fax: [phone]
[e-mail]
www.chauvin-arnoux.com
REFERENCES
MX 1 .................................................................................. MX1
MX 1 + TX 01 + case ............................................ MX0001-T
MX 2B + MN 09 clamp .......................................MX0002B
MX 2B + TX 01 + MN 09 + case ...............MX0002BT-MN
All our products are supplied as standard with their leads, battery and operating
manual.
MX 2B & MX 1
ANALOGUE MULTIMETERS
TECHNICAL SPECIFICATIONS
MX 2B MX 1
DC VOLTAGES
Calibres 0.5 V - 1.5 V - 5 V - 15 V - 50 V - 150 V - 500 V - 1.5 kV
(1)
150 mV - 0.5 V - 1.5 V - 5 V - 15 V - 50 V - 150 V - 500 V - 1.5 kV
(1)
Protection
320 Veff (cal. ≤ 5 V) - 500 Veff (15 V)
1,000 Veff (50 V) - 1,500 Veff (150 V to 1.5 kV)
320 Veff (cal. ≤ 5 V) - 500 Veff (15 V)
1,000 Veff (50 V) - 1,500 Veff (150 V to 1.5 kV)
Accuracy class 2 2
Input impedance 20 kΩ /V 6.32 kΩ /V
AC VOLTAGES
Calibres 5 V - 15 V - 50 V - 150 V - 500 V - 1.5 kV
(1)
5 V - 15 V - 50 V - 150 V - 500 V - 1.5 kV
(1)
Protection
320 Veff (cal. ≤ 15 V) - 500 Veff (50 V)
1,000 Veff (150 V) - 1,500 Veff (500 V and 1.5 kV)
320 Veff (cal. ≤ 15 V) - 500 Veff (50 V)
1,000 Veff (150 V) - 1,500 Veff (5,000 V and 1.5 kV)
Bandwidth 16 Hz to 1 kHz (500 Hz / 1,500 V) 16 Hz to 1 kHz (500 Hz / 1,500 V)
Accuracy class 2.5 2.5
Input impedance 2 kΩ /V 6.32 kΩ /V
DC CURRENTS
Calibres 50 μA - 10 A 50 - 500 μA - 5 - 150 - 500 mA - 1.5 - 10 A
Accuracy class 2 2
Voltage drop < 0.5 V 1.2 V max
Protection 1.6 A and 10 A fuses - 10 kA / 600 Veff 1.6 A and 10 A fuses - 10 kA / 600 Veff
AC CURRENTS
Calibres
with MN 09 clamp
10 A 20 A 100 A 200 A
500 μA - 5 - 150 - 500 mA - 1.5 - 10 A
Accuracy class 3 3 3 3 2.5
Voltage drop – 1.2 V max
Protection 1.6 A - 10 kA fuses / 600 Veff 1.6 A and 10 A fuses - 10 kA / 600 Veff
RESISTANCES
Calibres x 1 x 10 x 100 x 1 x 10 x 100
Middle point 200 Ω 2 Ω 20 Ω 200 Ω 2 Ω 20 Ω
Accuracy class 2.5 2.5
Protection Electronic 400 Veff (5 s) + audible alarm Electronic 400 Veff (5 s) + audible alarm
CONTINUITY
Detection threshold R < 150 Ω R < 150 Ω
OTHER MEASUREMENTS
Diode test Yes Yes
dB Yes Yes
General specifications
Sealing IP 65
Scale length 80 mm
Safety IEC EN 61010-1 Edition 2, Cat. III 600 V - Pollution level 2
Operating temperature -10 °C to +50 °C
Power supply 1.5 V battery (AA, R6)
Dimensions / weight 40 x 98 x 150 mm / 420 g
(1) For use up to 600 Vmax.
906111780 - Ed. 4 VS - 06/2015 - Non contractual document. Confirm specifications before ordering.
Information and ordering