User Manual

English

20 Multimeter MX1

Supply

To order

Delivery

• 1 MX1 multimeter

• 1 set of 2 leads with tips

• 4 fuses, 2 spares

• 1 fitted 1,5V battery

• 1 instructions leaflet

• 1 strap on the back of the casing

Spare parts and

accessories

• 1 LR6 1,5V battery...................................................P01296033

• 1 HPC fuse 1,6A / 6,3x32 / 600V / 50kA ...................AT0071

• 1 HPC fuse 10A / 6,3x32 / 600V / 50kA ....................AT0070

Different measurement accessories widen the scope of application or

provide the altimeter with new functions.

Documentation on request.

• Current clamp : ratio 1000/1 (MN08) ...........................P01120401

• Carry case 240 x 230 70mm with strap......................P01298033

• Set of leads with tips ................................................P01295084

• Set of crocodile clamps ............................................P01101848

• 30kVDC high voltage probe, ratio 100/1 ....................HT 212

Warranty

Our warranty lasts three years for the multimeter and one year for the

accessories after the delivery date except for express stipulations (extract

from our General Sales Terms provided on request).

Maintenance

Only use the specified spare parts for maintenance. The manufacturer shall

not be held liable for any incident occurring following repairs carried out by a

party other than its after-sales service or approved repairers.

Battery and fuse

change

Opening the multimeter:

Open the device by removing the measurement leads and taking out the four

screws on the back. Remove the lower part of the casing.

Changing the

battery

Open the device. Change the battery if the buzzer does not function when the

VΩ and COM inputs are in short-circuit on the W x 1 calibre. Ensure that the

battery is the right way up.